Most West Linn Decks Fail at the Ledger — Here's What Correct Attachment Looks Like
Why the Industry's Most Common Shortcut Creates the Most Expensive Repair
The majority of deck failures in the Pacific Northwest don't start at the decking surface — they start where the deck meets the house. Ledger board attachment is the highest-consequence connection in any deck structure, and it's also the most frequently done wrong. When a ledger is face-mounted against siding rather than through it to the rim joist, or when flashing doesn't direct water over the top of the ledger and away from the band joist, water infiltrates the wall assembly at exactly the point where it's hardest to detect. In West Linn's climate, with rain falling on this connection point for seven or eight months a year, the resulting rot can compromise the rim joist and floor framing inside the wall before the deck shows any visible sag or movement.
Peak Exteriors builds decks in West Linn using ledger attachment methods that meet IRC prescriptive standards: through-bolted connections at specified spacing intervals, flashing that overlaps the ledger top and integrates with the housewrap behind the siding, and a gap between siding and ledger surface that allows drainage rather than trapping moisture. The difference is visible at the wall connection — clean metal flashing, no wood-to-siding contact, and fasteners you can actually see and inspect rather than buried under caulk that will eventually fail. Post bases are set on standoff hardware that keeps wood above concrete, eliminating the ground-contact rot pattern that degrades footings on older decks.